Actron Control SS9 Single Phase Soft Starter

This product has been engineered to address international power authority concerns with excess compressor inrush current and meets IEC standards for heat pump and air-conditioning compressors. The SS9 is suitable for condensers up to 18kW capacity. The SS9 comes in two enclosure types to suit your mounting requirements. SS 9D can be din rail mounted only and
SS9DP can be panel or din rail mounted.

Key Engineering Features

  • Maximum current delivery algorithm ensures limited start current and best low voltage mains performance
  • Includes in-built anti-cycle timer
  • In-built status indicator for easy trouble shooting
  • Full Electrical EU compliance certificate
  • C Tick compliance
  • Specifications
Technical Specifications
Nominal Operating Voltage 230Vac (min 185 Vac, max 264 Vac)
Power Frequency 50Hz
Application Wiring Common Neutral or Common Active
Compressor Sizes 2–6 HP (1.5–5.4kW Input Power)
Maximum Compressor LRA 150 Amps (max recommended)
Maximum Compressor Run Current 32 Amps
Maximum Starting Frequency 10 Starts per hour
Random Power up Delay Time Between 2 and 3 minutes
Maximum Soft Start Time 0.5 Second
Maximum Soft Start Current 45 Amps at 230Vac
Ambient Temperature Operation: – 10°C to 50°C
Ambient Humidity Operation: 10% to 85% Non Condensing
Weight Approximately 750g
Plastic Enclosure ABS Flame Retardant UL 94V-0, Safety Protection IP20
Size in mm – SS9D Plastic Enclosure H 98 x L 146 x W 77
Size in mm – SS9DP Plastic Enclosure H 98 x L 146 x W 104
Mounting – SS9D Din Rail – 2 Orientaions at 90 Degrees
Mounting – SS9DP Panel Mount (screws) or Din Rail – 2 Orientaions at 90 Degrees